Colombia

Brand new X79 BTC 5 card mining board +E5 2603 V2 2011 Pin CPU + RECC 8G DDR3 Memory + MSATA 120G Hard Drive Kit
If you want to use other CPUs, please use CPUs below 2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2
The BTC X79 motoard uses the H61 chip and a single-channel 2011 socket CPU; Design 5 Pcie3.0X8 graphics interface
The computing power of a single card is up to 48MH/s or more, and it perfectly supports 4G video memory graphics cards, which greatly improves the mining function of computing power.
In-line 5 card X79 (H61 chip) motoard, support 3060 3070 3080 graphics card!!! 60mm large-spacing graphics slot.

Supported CPU socket: 2011
Network card chip: 1xREALIEK 8105E 100M network card
Memory type: DDR3 supports desktop and server memory
Support Maximum memory capacity: 32G
Working environment: 0-95% relative humidity, non-condensing, -20°c-60°c
Memory description: Support 1066/1333/1600/1866MHz frequency
Memory: RECC 8G DDR3
Hard Disk: MSATA 120G
Heat dissipation: the motoard comes with a heat sink (if the chassis is not installed, it is recommended to add a small fan)
Detailed interface:
1. CPU socket: 1xLGA(2011)
2. USB port: 4xUSB 2.0
3. USB pin: 1xUSB 2.0
4. Hard disk interface: 1xSATA 3.0
5. Hard disk interface: 1xMSATA
6. Network card interface: 1xLAN
7. Memory slot: 1xDDR3
8. Chipset: BGA (H61)
9. BIOS initial restore: JCMOS
10. Graphics interface: 5xPCI Express 3.0 8X, pitch 60mm
11. Motoard/graphics card power supply: 6xPOWER_PE
12. Self-initiated call: AUTO_ON
Notice: Different batches of products are slightly different, and the colors of the slots and the bottom plate are random, the specified color is not accepted. Please understand it!
size:322x188mm
Material:PCB
colour:Black

Package Contents:
1 x motoard
1 x 8G memory ule
1 x E5-2603 V2 CPU
1 x hard drive MSATA 120G

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.