Vender Universal Water Temp/Temperature Gauge with Sensor NPT1/8 \\\'\\\' al mejor precio

Description: 1, open the box, remove the double-sided tape, attached to the bottom of the bracket. 2. Insert the protruding part of the mounting bracket into the meter cup and attach the mounting bracket to the meter cup using the bolts, nuts and washers included in the kit. 3. Attach 1~2 double-sided adhesive tape to the aluminum shell and connect it to the meter as a buffer. 4. Route the meter wires through the meter cup holes and connect them to the meter. 5. Place the meter in the meter cup and make sure the wires are not caught in the middle. Specification: Shell material: Plastic Meter front diameter: 70mm meter Back diameter: 65mm meter thickness 70mm Working voltage: 10V-16V (12V vehicles only) Measuring range: 20 ~ 120 ° C Working current: the maximum value when connecting a meter Red line: 200A (when the ignition switch is closed) 0.2 mA (when the ignition switch is turned off) White line: 0.5mA Temperature range: storage temperature operating temperature Wiring harness connection description: Red line: Connect the positive pole of the power supply (+12V) Orange line: ING White line: ILM line, backlight (+12V) Black line: ground (connected to the negative pole of the power supply) Package Includes: 1 Piece ADDCO Water Temp Gauge (20-120 Celsius) 1 Piece Water Temp Sensor (sensor thread NTP 1/8) 1 Piece Mounting Kit +Holder Cover 1 Piece Users Manual In English Note: The red triangle can be used as a limit mark, such as a speed limit instead of a warning indicator To move the position of the red triangle, remove the front cover once, then adjust its position and reinstall it.