Vender 【unewkingtrtyu】 50M Waterproof Moto Bluetooth Wireless Anti-interference Helmet Headset V5.0 CO al mejor precio

Features: -Latest bluetooth V5.0 chip, high fidelity stereo -No need for manual operation, automatic call answering -Built-in high sensitivity microphone with windproof sponge cover -bluetooth headsets have a static placement time of up to 1200 days -iOS system displays battery power and activates SIRI Smart Voice Assistant -bluetooth transmission rate is fast and stable, 20-50 meters transmission Distance -low power consumption, continuous playing music for 13 hours (100 volume) -English voice prompts for power on, power off, pairing success, low battery, Maximum volume, etc -Can be used in most motorcycle helmets on the market, can be installed in DIY, simple and convenient Specification: Name: bluetooth Headset Version V5.0, dual channel stereo output Frequency: 2.4026GHz-2.480GHz Transmission Distance: 20-50m / 66-164ft Channel: Stereo Speaker Parameters: 24 ohms / 30mm Speaker Power: 30 mW*2 Signal to Noise Ratio: 112dB Siri: Support Lithium Battery: 3.7V/250mAh Using Time: 13 hours (100 volume) Talk Time: 16 hours or more Standby Time: 700 hours or more Charging Time: About 2.5 hour Rest Time: 1200 days Installation: 1. Remove the inner lining of the ear part of the helmet, tear off the release paper of the tape surface, and stick the tape on the ear part of the helmet, stick one on each side, and press it firmly to make it firmly. 2. Tear off the release paper of the crocheted tape, put the tape on the back of the earphone, stick one on each side, and press it firmly to make it firmly. 3. Attach the earphone with the microphone tube and the button to the tape of the left ear of the helmet, and press it to make it firmly. Install the inner lining of the left ear back into the helmet, and position the microphone and USB charging head to ensure that the microphone is facing the mouth (if the adjustment is not in place, it may affect the call). 4. Pass the sub-headphone through the top of the helmet and buckle it on the rough surface of the helmet's right ear. Press it firmly to make it firmly. Then install the inner lining at the right ear. 5. The headset can be disassembled, the tape fix is better, pay attention not to use too much force when disassembling, so as not to pull the tape off. Package Included: 1 x bluetooth Headset 1 x User Manual 1 x USB Cable 3 x Microphone Sponge Cover 4 x Adhesive Tape Notes: 1. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 2. Please allow a little difference due to manual measurement.