Vender [Freegangsha] 20Pcs Pdr Car Dent Remove Pulling Puller Bridge Kit Paintless Dent Repair Tool DGDZ al mejor precio

Feature： No more waiting, no extra money spent on labor and high paint material cost from auto body shop repairs, Paintless Dent Repair Tool Kit is an ideal solution to repair auto dents dings and hail damage in half an hour without repainting the vehicle or damaging the factory finish. Save you lots of time and money. Paintless Dent Removal process is 100% environmental friendly. Special Features: Paintless Dent Repair Tool, Also suitable for the sheet metal processing of automobile, refrigerator, motorcycle body, washing machine,etc How to Use 1. Clean the dent with a clean wet cloth, mark the dent with marking pen 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, plug in the power and preheat for about 5 minutes 3. Select the correct tab according to the area of the dent, apply the drawing gasket with extruded glue 4. Immediately place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Cooling the glue for 8 minutes. The cooling time should be less than 10 minutes and shorter slightly in winter) 5. Align the dent puller bridge stand through hole and knob the screw to pull the sliding rod backwards to pull up the dent, continually tighten knob until dent repaired, spray alcohol on the glue, peel off the dent removal tool with plastic scraper to check dent repaired condition, repeat the steps to remove the dent more perfectly 6. Spray alcohol on the residual glue, remove it with glue shovel, clean the repaired place with a clean wet cloth Package include: 1 x PDR Dent Puller Bridge Stand 1 x 20W Hot Melt Glue Gun (US Plug) 5 x Dent Puller Tabs 10 x Glue Sticks 1 x Tap Down Pens 1 x Plastic Glue Scraper 1 x Alcohol Spray Bottle