Vender 80W Electric Soldering Iron Adjustable Temperature LCD Digital Display 110V 220V Welding Solder Iron Tips Repair Rework Tool Kit al mejor precio
0
calificaciones
45.347 COP
15% OFF
38.545 COP - 52.410 COP
Se envía desde | |
---|---|
Color | 80W Iron 80W Iron Set 80W Iron Kit |
Power | 220V EU Plug 110V US Plug |
Descripción del producto
Voltage: AC220-240V OR AC100-130V
Power: 80W Frequency: 50Hz/60Hz
Temperature Range: 180~500℃/356~932℉
Temperature Stability: ±5℃
Heating Type: Wmore Ceramics Element
Soldering Iron Tips: 900M-B1.2
Wire Length: 1.4m / 55.12in
Soldering Iron Size: Approx.242*25*25mm/9.6*0.98*0.98in
Soldering Iron Weight: Approx.96g/3.4oz
Package Size: Approx. 254*55*35mm/10*2.2*1.4n
Package Weight: Approx. 139g / 4.9oz
Instruction:
Press the (+) button once to increase 1℃; press and hold it to increase
temperature continuously.
Press the (-) button once to reduce 1℃; press and hold it to reduce
temperature continuously.
The newly set temperature will be saved after 3 seconds,and will keep
the temperature for next time powering-on.When (℉) or (℃) symbol
flashes, it means the heating core has not reached the set temperature.
Temperature Calibration:
1.After 60 seconds of power on, put the soldering tip on a thermometer,
and a moderate amount of solder on the soldering tip; make the test
point and the soldering tip have good touch.
2.When thermometer displays a stable temperature (about 2 seconds),
write down the temperature.
3.Move soldering iron away from thermometer;
press the (-) and (+) button at the same time to enter
temperature Calibration.
4.Input adjustment quantity. Adjustment quantity=set
temperature - measured temperature (see example)
5.Press the (-) and (+) at the same time to exit
temperature interface, finished.
Example 1, when setting temperature is 350℃ while
measured temperature is 342℃, the correction steps
are as follows:
a.press the (-) and (+) at the same time to enter
temperature correction interface.
b.press the "+" button till the LCD displays 8℃
c.press the (-) and (+) at the same time to exit
temperature correction interface
Example 2, when setting
temperature is 350℃ while
measured temperature is
330℃,the correction steps
are as follows:
a.press the (-) and (+)
at the same time to enter
temperature correction
interface.
b.press the (-) button till
the LCD displays -20℃
c.press the (-) and (+)
at the same time to exit
temperature correction
interface
Parameter setting:
1.To press the red and white button both at
the same time before it is power on, power
on,after the LCD is working,stop to press the
button, you will enter the setting menu.The
LCD shows (F) or (C)
2.Press the white button to choose C(degree
centigrade) or F(Fahrenheit).Press the Red
button to choose Element U20(JCD01),U20(JC
D02),U30(JCD03),U40(JCD04).
3.Pressing the (-) and (+) at the same time
to save your setting operation and quit the
setting menu(finished)
To protect the user from scald, when on the
setting menu, it will stop heating.
Failure warning indication
The LCD shows (OP): the heating element is open circuit.
Solution:1.change the element.2.To confirm that whether
the pin of element is oxidized.
The LCD shows(E1):The outlet is poor contact,or thebattery
source interfering the soldering iron that it is power down.
Solution:1.Unplug the soldering iron.2.Close the interfering
source. 3.To use it far away from the interfering source.
Note
This product has an automatic sleep function. When you are not using it, the soldering iron will automatically sleep after 10 minutes. When you use it, the soldering iron will quickly rise to the temperature you set.
80W Iron Package List
1pcs 80W LCD soldering iron (220V EU plug / 110V US Plug)